Highly Liquid Forum facebook twitter google plus rss feed
  #1  
Old 03-16-2012, 01:25 PM
John's Avatar
John John is offline
Moderator
 
Join Date: Jan 2009
Posts: 2,748
Default VL-1-MIDI Installation Instructions

Overview
  • The VL-1-MIDI kit is based on the UMR kit. Because of the size of the VL-1, the UMR PCB must be housed outside of the VL-1. An enclosure is not included with the kit.
  • The VL-1-MIDI responds to MIDI notes 55-83.

PCB Assembly
Follow the UMR assembly instructions for "scan high" configuration.

DIP Switch Settings
SW1 settings are ignored. Use SW2 to specify the incoming MIDI channel as specified here.

Connections
Connection points between the UMR and VL-1 are shown in the images below. Connect the following lines from the UMR circuit board to the VL-1:
  • "DC IN" GND and 5V
  • Select In 1-6 (S1-S6 in diagram)
  • Data Out 1-6 (D1-D6 in diagram)

VL-1 PCB, Left Side



VL-1 PCB, Right Side


Last edited by John; 03-16-2012 at 01:41 PM.
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 04:43 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.