Highly Liquid Forum facebook twitter google plus rss feed
  #1  
Old 08-02-2011, 05:20 PM
John's Avatar
John John is offline
Moderator
 
Join Date: Jan 2009
Posts: 3,007
Default MD24 note "gate" output

R. writes:

Quote:
I am looking at programming the following sys ex on a future purchase
of an MD24;

010400-note number -bit 0
020500-note number -bit 1
030600-note number -bit 2
040700-note number -bit 3
050800-note number -bit 4
060900-note number -bit 5
070A00-note number -bit 6

My question is;
Is there a way to isolate the 'note on ' bit and route it to an individual
output so I may use it as a gate bit? Bear in mind, I only need the
note on bit and not the note number hex (in mm01), otherwise I may
need to use shift registers.
If not, do you know of any creative way to get this? Maybe something
simple I am overlooking? Also, I'm guessing the outputs per above are
bits alone, not bit streams?
I'm not sure if I totally understand the question, but hopefully this will move the conversation forward:

It is very easy to get a "gate" signal from an MD24 output, as long as you want the gate for a specific note number.

In fact, without any configuration change at all, the MD24 will generate a gate signal for MIDI notes 60-83. This is the "factory default" configuration.

If you'd like to have different note numbers, let me know and we'll discuss how to change the configuration.

Hope this helps.
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 07:42 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.