Highly Liquid Forum facebook twitter google plus rss feed
Old 10-31-2014, 04:34 PM
John's Avatar
John John is offline
Join Date: Jan 2009
Posts: 3,007

Originally Posted by campbell View Post
I installed the UMR2 in my Poly 61 and it works perfectly.

I was curious if there might be a way to trigger the Arp using the UMR2 that's already installed in my unit. It just needs a switch trigger. My hope would be to use a midi note (that is beyond the Poly 61's range) to trigger the Arp. Any thoughts?
If the Arp button shares the data lines from the keyswitch matrix, then it might work if you connect the Arp select line to the unused UMR2 select I/O terminal. You'd have to repeat the UMR2 setup procedure.

If the data lines are not shared by the keys and the Arp button, then you could use a general-purpose MIDI decoder to trigger a relay.
Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT. The time now is 05:32 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.