Highly Liquid Forum facebook twitter google plus rss feed
  #1  
Old 09-03-2013, 09:51 PM
John's Avatar
John John is offline
Moderator
 
Join Date: Jan 2009
Posts: 3,007
Default Casio SK-10 Installation

Step 1: Assemble the SKM circuit board.

See the illustrated assembly notes. Set position #5 on the DIP switch to "OFF".

Step 2: Ground "AUX SCAN" pads 3 & 4.

Connect "AUX SCAN" pads 3 and 4 to ground. Ground can be accessed at the negative terminal of C3.

Step 3: Attach the hook-up wires.

Attach a 15" length of wire to each of the following pads on the SKM circuit board:
  • MIDI "4" and "5"
  • "+5V" and "GND"
  • "TO KEYBOARD" pads 1-12

Step 4: Disconnect power from the SK-10.

Disconnect any external power cords and remove any batteries from the SK-10. After disconnection, move the SK-10 "mode" switch to the "play" position to drain any stored charges.

Step 5: Mount the MIDI jack on the SK-10.

The MIDI jack requires one 5/8" hole and two 3/32" holes as shown.
You must supply 2 screws to mount the jack. Use #4 sheet metal screws.

Step 6: Mount the SKM circuit board.

There is space inside the SK-10 near the speaker.

Step 7: Connect the MIDI jack to the SKM.

Connect pin 4 on the MIDI jack to the pad marked "M4" on the SKM circuit board. Connect pin 5 on the MIDI jack to the pad marked "M5" on the SKM circuit board.

Step 8: Connect the SKM power lines to the SK-10.

Connect the "GND" and "+5V" pads on the SKM circuit board to the SK-10 main board as shown.



Step 9: Connect the SKM keyboard control lines to the SK-10.



Locate the 21-conductor ribbon cable that connects the SK-10 keys to the SK-10 main board. The conductors are numbered 1 to 21. Connect each of the "TO KEYBOARD" pads on the SKM circuit board to the ribbon cable as shown below.

[SKM "TO KEYBOARD"] - [SK-10 21-Pin Ribbon]
1 - 10
2 - 2
3 - 5
4 - 3
5 - 4
6 - 11
7 - 12
8 - 13
9 - 14
10 - 15
11 - 16
12 - 17

Installation Complete

Connect your SK-10 to the "MIDI OUT" port on any MIDI sequencer or MIDI controller.
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 06:54 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.