Highly Liquid Forum facebook twitter google plus rss feed
Old 04-07-2012, 01:48 PM
John's Avatar
John John is offline
Join Date: Jan 2009
Posts: 3,007
Default CS01-MIDI Assembly and Installation

The CS01-MIDI kit is based on the UMR kit. Because of the size of the CS01, the UMR PCB must be housed outside of the CS01. An enclosure is not included with the kit.

PCB Assembly
Follow the UMR assembly instructions for "scan high" configuration.

DIP Switch Settings
SW1 settings are ignored. Use SW2 to specify the incoming MIDI channel as described here.

Control Wiring
Connection points on the CS01 circuit board are shown in the image below.

Connect the following lines from the UMR circuit board to the CS01 12-pin ribbon cable:

Power Wiring
The UMR must be wired to the CS01 as shown in the diagram below. The zener diode 1N4734A and the 220Ω resistor are included with the kit.


Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT. The time now is 11:28 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.